| |
Fume Hoods |
 |
 |
| |
| Features : |
|
- Unique guide plate effectively eliminates the dead angle of exhaust flow.
- Optimized air injection system completely eliminates disordered flow.
- Seamless linking of inside wall prevents exposure to corrosive environment.
- No metal parts in working area highly considering anti-corrosion.
- Sealed inside light source is safe and convenient for experiment monitoring.
- Advanced explosion-proof slide door is convenient for safe lift up and down.
- Excellent exhaust air motor is steady, dependable and low noise.
- Side panel is removable and flexible for water, flow, and circuit maintenance.
|
 |
|
Specification : |
|
Model |
LabVent 120 |
LabVent 150 |
LabVent 180 |
LabVent 240 |
|
Specification |
Total Width (mm) |
1200 |
1500 |
1800 |
2400 |
| Total height (mm) |
2400 |
| Outside depth (mm) |
820 |
| Worktable height (mm) |
900 |
| Exhaust flow rate (m3 /min) |
|
12 |
16 |
22 |
26 |
| Exhaust pipe caliber (mm) |
|
200 |
| Flow rate (m/s)02 |
|
0.5( half open ) |
| Material |
|
Cold rolled steel panel (with unique corrosion resistance treatment) or full plastic |
| Worktable surface |
|
Chemsurf panel or resin of WILSONART\FORMICA |
| Inner wall and guide plate |
|
Solid Phenolic Core Panel (extremely strong acid and alkali resistance) or PVC plank of WILSONART\FORMICA |
|
|
| Fume Hood for hazardous materials |
- Approved fume hood for requirements in pharmacies in accordance with DIN 12924 Part 4 for safe handling of chmemicals, protection against health-endagering vapours and explosive atmospheres
- Special fume hoos for requirements in pharmacies
- Made of sheet-steel, plastic laminated, high resistance against chemicals
- Integrated light
- Ergonomical design and easy operation
- Continously variable, height adjustable acrylic front slide
- Ventilation system approved by an authorised testing institute
- with integrated extraction air ventilator
- Extraction air inlet (dia. 100 mm) on the top
- Standard with 2 power sockets (Schuko), 230V/50Hz
- Easy placing on a desk top
- Load capacity of the desk top
min. 100 kg/m²- Fitting base frames (optional)
- Optional with supplies(gas, water, drain)
- Electronic monitoring system as a standard
- Extraction air amount of the ventilator 250 m³/h
- Pressure drop with extraction air duct max. 150 Pa
- Noise level 53 dB(A)
- Drain connection 4 mm
- Supply connection 12 mm
|
| |
| APA.145.75 |
| Exterior dimensions (WxDxH) |
750 x 600 x 1450 mm |
| Interior dimensions(WxDxH) |
740 x 490 x 930 |
| Weight approx. |
55 kg |
| APA.145.90 |
| Exterior dimensions (WxDxH) |
900 x 600 x 1450 mm |
| Interior dimensions(WxDxH) |
890 x 490 x 930 |
| Weight approx. |
65 kg |
|
