| The LAMBDA MINIFOR fermentor/bioreactor is controlled by two microprocessors |
| Power: |
Mains 100-245 V AC/50-60Hz, 400W, CE conform |
| Dimensions: |
22x40x38cm (WxDxH) |
| Display: |
LCD 4 x 40 digits with backlight illumination |
| Fermentor vessel |
glass with 5 to 8 side necks 0.2,5, 1, 2, 3 and 5 l |
| Temperature control |
IR radiation heat source with gilded reflector 150W |
| Regulation |
from 5°C over RT to 70°C |
| Measurement |
from 0 to 99.9°C in 0.1°C steps |
| Precision |
± 0.2°C (0 to 60°C) |
| Sensor |
Pt 100 incorporated in the pH sensor |
| pH control |
sterilizable pH electrode (pH 0-13), with automatic
temperature correction, Variopin connector, two-point
semiautomatic calibration |
| Resolution |
0.01 pH unit |
| Precision |
± 0.02 pH unit |
| pO2 control |
sterilizable Clark type oxygen sensor with fast response,
reinforced Teflon membrane and automatic temperature
correction, control through regulation of air flow rate, |
| Range |
0 to 25 mg oxygen/l, in 0.1 mg/l steps |
| Air flow |
to 5 l/min. in 0.1 l/min. steps, mass flow meter, linearity
± 3%, |
| Control |
proportional valve |
| Supplied air pressure |
between 0.05 – 0.2 MPa |
| Agitation |
40 W Vibromixer 0 to 20 Hz with 1 or more stirring discs
Sterility comparable to magnetic coupling |
| Selectable parameter |
an additional parameter can be controlled by the
instrument (foaming control, pCO2, optical density,
conductivity, etc.) |
| Sampling ports |
up to 4 needles with Luer-Lock fittings can be used for
sampling and addition of correction solutions |
| Pumps |
|
| Working temperature |
up to 4 independent peristaltic pumps (PRECIFLOW,
MULTIFLOW, HIFLOW or MAXIFLOW) with speed
variation
from 0 to 100 % can be used with MINIFOR |
| Working relative Humidity |
0 – 40 °C |
| Weight |
7.5 kg |
| PC control |
complete PC control and data treatment using FNet or
SIAMfermentation software |
